登录 / 注册
白板笔 （红色）图纸下载,该图纸类型属于机械设备、非标设备图纸,图纸大小26.43M,图纸格式为ipt,iam,图纸软件为Inventor 2014,可供设计参考。
白板笔 （红色）
图纸描述
白板笔 （红色）图纸下载,该图纸类型属于机械设备、非标设备图纸,图纸大小26.43M,图纸格式为ipt,iam,图纸软件为Inventor 2014,可供设计参考。
下载需要75金币
立即下载 收藏
图纸信息
作者
虞若烟
已分享: 份作品
文件列表
| # | 文件名称 | 大小 |
|---|---|---|
| 1 |  动画2.avi | 211.82M |
| 2 | 动画中墨水2.avi | 225.89M |
| 3 | 动画仿真.avi | 413.37M |
| 4 | 动画加墨水.avi | 225.89M |
| 5 | 汁身.ipt | 74.50K |
| 6 | 油笔.ipj | 6.59K |
| 7 | 笔帽.ipt | 374.50K |
| 8 | 笔盖.ipt | 621.00K |
| 9 | 笔芯.ipt | 84.00K |
| 10 | 笔身.ipt | 3.97M |
| 11 | 红墨汁.ipt | 120.50K |
| 12 | 装配图.iam | 731.50K |
| 13 | 汁身.0001.ipt | 67.00K |
| 14 | 油笔.ipj.bak | 6.59K |
| 15 | 笔帽.0006.ipt | 377.00K |
| 16 | 笔盖.0007.ipt | 619.00K |
| 17 | 笔芯.0003.ipt | 82.00K |
| 18 | 笔身.0009.ipt | 3.99M |
| 19 | 红墨汁.0002.ipt | 120.00K |
| 20 | 装配图.0012.iam | 674.00K |
| 21 | Balloon.xml | 59.58K |
| 22 | CenterMark.xml | 10.42K |
| 23 |  Clearance.xls | 121.50K |
| 24 | Colors.xml | 588.08K |
| 25 | DatumTarget.xml | 30.28K |
| 26 | Dimension.xml | 2.99M |
| 27 | ExternalMaterialMapping.xml | 23.05K |
| 28 | FeatureAutoname.xml | 16.08K |
| 29 | FeatureControlFrame.xml | 29.65K |
| 30 | Hatch.xml | 6.75K |
| 31 | HoleTable.xml | 1.24M |
| 32 | Id.xml | 40.71K |
| 33 | Layers.xml | 154.94K |
| 34 | Leader.xml | 47.60K |
| 35 | Lighting.xml | 25.58K |
| 36 | Materials.xml | 183.08K |
| 37 | ObjectDefaults.xml | 449.48K |
| 38 | PartsList.xml | 313.80K |
| 39 | ProteinMapping.xml | 34.34K |
| 40 | RealisticAllowedCommands.xml | 28.86K |
| 41 | RevisionTable.xml | 95.58K |
| 42 | SheetMetalRules.xml | 6.12K |
| 43 | SheetMetalUnfold.xml | 5.78K |
| 44 | Standard.xml | 233.20K |
| 45 | StudioLighting.xml | 250.46K |
| 46 | StudioScene.xml | 23.04K |
| 47 | SurfaceTexture.xml | 22.56K |
| 48 | Table.xml | 36.63K |
| 49 | Text.xml | 28.56K |
| 50 | Thread.xls | 1.42M |
| 51 | ViewAnnotation.xml | 28.13K |
| 52 | Weld.xml | 33.37K |
| 53 | WeldBead.xml | 14.31K |
| 54 | BendTablein.txt | 10.34K |
| 55 | BendTablein.xls | 44.00K |
| 56 | BendTablemm.txt | 10.33K |
| 57 | BendTablemm.xls | 215.00K |
| 58 | CableTrayConnector.xml | 1.33K |
| 59 | ConduitConnector.xml | 1.88K |
| 60 | DuctConnector.xml | 22.02K |
| 61 | DWGSettings.ini | 1.06K |
| 62 | ElectricalConnector.xml | 11.57K |
| 63 | PartAtom.xml | 651B |
| 64 | PipeConnector.xml | 33.13K |
| 65 | TranslationReport.xsl | 33.74K |
| 66 | autodesk-design-package.xml | 121B |
| 67 | CoreProperties.xml | 341B |
| 68 | package.guid | 36B |
| 69 | [Content_Types].xml | 505B |
| 70 | runtime.guid | 36B |
| 71 | runtime.properties.xml | 261B |
| 72 | attributes.xml | 343B |
| 73 | attributes.xml.guid | 36B |
| 74 | attributes.xml.properties.xml | 300B |
| 75 | core.xml | 1.54K |
| 76 | core.xml.guid | 36B |
| 77 | core.xml.properties.xml | 294B |
| 78 | hardware20buffers.xml | 7.99K |
| 79 | hardware20buffers.xml.guid | 36B |
| 80 | hardware20buffers.xml.properties.xml | 306B |
| 81 | implicits.xml | 1.66K |
| 82 | implicits.xml.guid | 36B |
| 83 | implicits.xml.properties.xml | 299B |
| 84 | polygon20meshes.xml | 1.06K |
| 85 | polygon20meshes.xml.guid | 36B |
| 86 | polygon20meshes.xml.properties.xml | 304B |
| 87 | attributes.xml.rels | 721B |
| 88 | core.xml.rels | 709B |
| 89 | hardware20buffers.xml.rels | 737B |
| 90 | implicits.xml.rels | 719B |
| 91 | polygon20meshes.xml.rels | 733B |
| 92 | runtime.rels | 1.41K |
| 93 | .rels | 631B |
| 94 | AirTerminals.xml | 2.60K |
| 95 | Casework.xml | 3.71K |
| 96 | Categories.xml | 760.59K |
| 97 | CommunicationDevices.xml | 1.67K |
| 98 | DataDevices.xml | 1.65K |
| 99 | Doors.xml | 2.03K |
| 100 | DuctAccessories.xml | 2.48K |
| 101 | ElectricalEquipment.xml | 8.26K |
| 102 | ElectricalFixtures.xml | 1.66K |
| 103 | FireAlarmDevices.xml | 1.66K |
| 104 | Furniture.xml | 1.64K |
| 105 | FurnitureSystems.xml | 1.66K |
| 106 | GenericModels.xml | 1.65K |
| 107 | LightingFixtures.xml | 1.65K |
| 108 | MechanicalEquipment.xml | 1.66K |
| 109 | PipeAccessories.xml | 1.66K |
| 110 | PlumbingFixtures.xml | 4.08K |
| 111 | SecurityDevices.xml | 1.66K |
| 112 | SpecialtyEquipment.xml | 1.66K |
| 113 | TelephoneDevices.xml | 1.66K |
| 114 | Windows.xml | 1.63K |
| 115 | CamCylindrical.htm | 11.27K |
| 116 | colors.css | 4.65K |
| 117 | main.js | 388B |
| 118 | Reports.ini | 5.52K |
| 119 | Beam.htm | 4.41K |
| 120 | Column.htm | 4.09K |
| 121 | Bearing.htm | 9.32K |
| 122 | BellSpr.htm | 7.81K |
| 123 | BoltConn.htm | 7.49K |
| 124 | BoltConnFat.htm | 2.99K |
| 125 | BrakeBand.htm | 6.68K |
| 126 | BrakeDisc.htm | 6.72K |
| 127 | BrakesCone.htm | 6.80K |
| 128 | BrakesShoe.htm | 6.60K |
| 129 | CamCylindrical.htm | 11.27K |
| 130 | CamDisc.htm | 11.78K |
| 131 | CamLinear.htm | 11.51K |
| 132 | Segment.htm | 2.21K |
| 133 | FSprocket.htm | 3.20K |
| 134 | RChain.htm | 3.06K |
| 135 | RChains.htm | 11.91K |
| 136 | RSprocket.htm | 7.63K |
| 137 | ClevisPin.htm | 7.53K |
| 138 | PartAMaterial.htm | 283B |
| 139 | PartBMaterial.htm | 281B |
| 140 | PinMaterial.htm | 413B |
| 141 | CompressSpring.htm | 13.35K |
| 142 | SCWorkingDiagram.bmp | 820.33K |
| 143 | SCWorkingDiagram_Left.bmp | 820.33K |
| 144 | Cone.htm | 5.71K |
| 145 | CrossPin.htm | 7.29K |
| 146 | PartAMaterial.htm | 283B |
| 147 | PartBMaterial.htm | 281B |
| 148 | PinMaterial.htm | 284B |
| 149 | Gear1.htm | 18.74K |
| 150 | Gear1ANSI.htm | 2.81K |
| 151 | Gear1ANSI2.htm | 3.57K |
| 152 | Gear1Bach.htm | 445B |
| 153 | Gear1ISO.htm | 5.02K |
| 154 | Gear1Merrit.htm | 1.61K |
| 155 | Gear2.htm | 19.55K |
| 156 | Gear2ANSI.htm | 2.81K |
| 157 | Gear2ANSI2.htm | 3.57K |
| 158 | Gear2Bach.htm | 445B |
| 159 | Gear2ISO.htm | 5.14K |
| 160 | Gear2Merrit.htm | 1.61K |
| 161 | Gear3.htm | 14.77K |
| 162 | Gear3ANSI.htm | 975B |
| 163 | Gear3ISO.htm | 2.99K |
| 164 | JointPin.htm | 7.51K |
| 165 | PartAMaterial.htm | 291B |
| 166 | PartBMaterial.htm | 281B |
| 167 | PinMaterial.htm | 284B |
| 168 | KeyParallel.htm | 7.60K |
| 169 | KeyParallelHub.htm | 460B |
| 170 | KeyParallelHubMaterial.htm | 314B |
| 171 | KeyParallelKey.htm | 882B |
| 172 | KeyParallelKeyMaterial.htm | 279B |
| 173 | KeyParallelShaft.htm | 460B |
| 174 | KeyParallelShaftMaterial.htm | 412B |
| 175 | LimitsFits.htm | 5.72K |
| 176 | PlainBearing.htm | 13.04K |
| 177 | Plates.htm | 6.59K |
| 178 | PowerScrew.htm | 7.37K |
| 179 | PressFit.htm | 9.72K |
| 180 | PartAMaterial.htm | 412B |
| 181 | PartBMaterial.htm | 281B |
| 182 | PinMaterial.htm | 284B |
| 183 | RadialPin.htm | 7.76K |
| 184 | Flat-Pulley.htm | 3.04K |
| 185 | S-Belt.htm | 2.01K |
| 186 | S-Pulley.htm | 4.40K |
| 187 | SBelts.htm | 7.37K |
| 188 | PartAMaterial.htm | 283B |
| 189 | PartBMaterial.htm | 281B |
| 190 | PinMaterial.htm | 284B |
| 191 | SecurePin.htm | 7.29K |
| 192 | SepHubJoint.htm | 6.63K |
| 193 | Profiles.htm | 8.29K |
| 194 | Shaft.htm | 4.44K |
| 195 | SltHubJoint.htm | 8.65K |
| 196 | SolderBevel.htm | 5.66K |
| 197 | SolderButt.htm | 5.18K |
| 198 | SolderLapJoint.htm | 5.46K |
| 199 | SolderStepSolid.htm | 5.47K |
| 200 | SolderStepTube.htm | 5.57K |
| 201 | Spline1.htm | 6.87K |
| 202 | Spline1Hub.htm | 348B |
| 203 | Spline1HubMaterial.htm | 519B |
| 204 | Spline1Shaft.htm | 1.24K |
| 205 | Spline1ShaftMaterial.htm | 521B |
| 206 | SplineInv.htm | 5.97K |
| 207 | SplineInv_Dims_ANSI.htm | 3.50K |
| 208 | SplineInv_Dims_ANSIM.htm | 4.46K |
| 209 | SplineInv_Dims_CSN.htm | 4.57K |
| 210 | SplineInv_Dims_DIN5480.htm | 5.61K |
| 211 | SplineInv_Dims_DIN5482.htm | 686B |
| 212 | SplineInv_Dims_GOST.htm | 4.57K |
| 213 | SplineInv_Dims_ISO.htm | 4.57K |
| 214 | SplineInv_Material_ANSI.htm | 549B |
| 215 | SplineInv_Material_Common.htm | 439B |
| 216 | SplineInv_Material_CSN.htm | 448B |
| 217 | SplineInv_Prop_ANSI.htm | 699B |
| 218 | SplineInv_Prop_Common.htm | 585B |
| 219 | SplineInv_Prop_CSN.htm | 505B |
| 220 | SplineInv_Res_ANSI.htm | 1.03K |
| 221 | SplineInv_Res_Common.htm | 651B |
| 222 | SplineInv_Res_CSN.htm | 651B |
| 223 | STNWorkDiagram_WithoutPrestress.bmp | 245.19K |
| 224 | STNWorkDiagram_WithoutPrestress_Left.bmp | 245.19K |
| 225 | STNWorkDiagram_WithPrestress.bmp | 245.19K |
| 226 | STNWorkDiagram_WithPrestress_Left.bmp | 245.19K |
| 227 | TensionSpring.htm | 12.13K |
| 228 | Tolerance.htm | 3.99K |
| 229 | TorsionSpring.htm | 13.59K |
| 230 | Flat-Pulley.htm | 3.31K |
| 231 | V-Belt.htm | 2.14K |
| 232 | V-Grv-Pulley.htm | 4.55K |
| 233 | VBelts.htm | 8.61K |
| 234 | WeldButt.htm | 10.12K |
| 235 | WeldButtFat.htm | 7.79K |
| 236 | WeldFilletCop.htm | 11.83K |
| 237 | WeldFilletCopFat.htm | 6.37K |
| 238 | WeldFilletSpa.htm | 20.27K |
| 239 | WeldFilletSpaFat.htm | 6.50K |
| 240 | WeldPlugGrv.htm | 6.69K |
| 241 | WeldSpot.htm | 6.18K |
| 242 | _TablesMap.xml | 48.96K |
| 243 | AddlForcesFactor.res.xml | 1.04K |
| 244 | AddlForcesFactor.xml | 1.55K |
| 245 | ANSITemp.res.xml | 204B |
| 246 | ANSITemp.xml | 873B |
| 247 | SKFTemp.res.xml | 210B |
| 248 | SKFTemp.xml | 663B |
| 249 | FrictionFactor.res.xml | 687B |
| 250 | FrictionFactor.xml | 1.87K |
| 251 | ThreadFrictionFactor.res.xml | 337B |
| 252 | ThreadFrictionFactor.xml | 1.20K |
| 253 | BrakePressure.res.xml | 387B |
| 254 | BrakePressure.xml | 895B |
| 255 | BrakePressure_Imp.res.xml | 387B |
| 256 | BrakePressure_Imp.xml | 888B |
| 257 | FrictionFactor.res.xml | 382B |
| 258 | FrictionFactor.xml | 904B |
| 259 | f1.res.xml | 417B |
| 260 | f1.xml | 1.74K |
| 261 | f3.res.xml | 193B |
| 262 | f3.xml | 593B |
| 263 | f4.res.xml | 988B |
| 264 | f4.xml | 2.13K |
| 265 | f5.res.xml | 199B |
| 266 | f5.xml | 563B |
| 267 | f6.res.xml | 199B |
| 268 | f6.xml | 659B |
| 269 | fC.xml | 1.76K |
| 270 | fk.xml | 2.14K |
| 271 | fm.xml | 929B |
| 272 | fY.res.xml | 2.76K |
| 273 | fY.xml | 7.46K |
| 274 | fZ.xml | 715B |
| 275 | f_y.xml | 899B |
| 276 | pb.xml | 6.47K |
| 277 | RChains.res.xml | 107B |
| 278 | RChains.xml | 7.73K |
| 279 | RChainsMap.xml | 22.93K |
| 280 | ASME291M.res.xml | 176B |
| 281 | ASME291M.xml | 24.39K |
| 282 | ASME291MB.res.xml | 176B |
| 283 | ASME291MB.xml | 6.31K |
| 284 | ASME291MH.res.xml | 188B |
| 285 | ASME291MH.xml | 20.36K |
| 286 | ASME293.res.xml | 181B |
| 287 | ASME293.xml | 3.14K |
| 288 | CSN023311.res.xml | 176B |
| 289 | CSN023311.xml | 16.87K |
| 290 | CSN023311_US.res.xml | 176B |
| 291 | CSN023311_US.xml | 11.96K |
| 292 | CSN023315.res.xml | 180B |
| 293 | CSN023315.xml | 3.68K |
| 294 | CSN023321.res.xml | 165B |
| 295 | CSN023321.xml | 3.14K |
| 296 | CSN023329.res.xml | 171B |
| 297 | CSN023329.xml | 6.69K |
| 298 | DIN8154.res.xml | 163B |
| 299 | DIN8154.xml | 3.81K |
| 300 | DIN8164.res.xml | 169B |
| 301 | DIN8164.xml | 6.63K |
| 302 | DIN8181.res.xml | 192B |
| 303 | DIN8181.xml | 4.09K |
| 304 | DIN8181_US.res.xml | 192B |
| 305 | DIN8181_US.xml | 3.43K |
| 306 | DIN8187.res.xml | 192B |
| 307 | DIN8187.xml | 22.60K |
| 308 | DIN8188.res.xml | 192B |
| 309 | DIN8188.xml | 14.24K |
| 310 | DIN8189_C.res.xml | 174B |
| 311 | DIN8189_C.xml | 2.26K |
| 312 | DIN8189_S.res.xml | 174B |
| 313 | DIN8189_S.xml | 4.43K |
| 314 | GOST13568-75_PRD.res.xml | 206B |
| 315 | GOST13568-75_PRD.xml | 3.92K |
| 316 | GOST13568-97_PB.res.xml | 196B |
| 317 | GOST13568-97_PB.xml | 2.75K |
| 318 | GOST13568-97_PR.res.xml | 196B |
| 319 | GOST13568-97_PR.xml | 14.03K |
| 320 | ISO10190.res.xml | 170B |
| 321 | ISO10190.xml | 5.65K |
| 322 | ISO1275.res.xml | 192B |
| 323 | ISO1275.xml | 4.09K |
| 324 | ISO1275_US.res.xml | 192B |
| 325 | ISO1275_US.xml | 3.43K |
| 326 | ISO487_C.res.xml | 173B |
| 327 | ISO487_C.xml | 2.26K |
| 328 | ISO487_HC.res.xml | 182B |
| 329 | ISO487_HC.xml | 2.27K |
| 330 | ISO487_HS.res.xml | 182B |
| 331 | ISO487_HS.xml | 4.48K |
| 332 | ISO487_S.res.xml | 173B |
| 333 | ISO487_S.xml | 4.43K |
| 334 | ISO606.res.xml | 191B |
| 335 | ISO606.xml | 21.22K |
| 336 | ISO606_B.res.xml | 162B |
| 337 | ISO606_B.xml | 3.89K |
| 338 | ISO606_H.res.xml | 195B |
| 339 | ISO606_H.xml | 10.91K |
| 340 | ISO606_US.res.xml | 191B |
| 341 | ISO606_US.xml | 14.24K |
| 342 | JISB1801_A1.res.xml | 209B |
| 343 | JISB1801_A1.xml | 14.73K |
| 344 | JISB1801_A2.res.xml | 209B |
| 345 | JISB1801_A2.xml | 14.77K |
| 346 | JISB1801_B.res.xml | 200B |
| 347 | JISB1801_B.xml | 20.64K |
| 348 | JISB1801_B1.res.xml | 176B |
| 349 | JISB1801_B1.xml | 3.88K |
| 350 | JISB1801_B2.res.xml | 176B |
| 351 | JISB1801_B2.xml | 3.89K |
| 352 | ServiceLife.res.xml | 591B |
| 353 | ServiceLife.xml | 1010B |
| 354 | ServiceLifeR.res.xml | 626B |
| 355 | ServiceLifeR.xml | 955B |
| 356 | Ka.res.xml | 695B |
| 357 | Ka.xml | 1.95K |
| 358 | Kd.res.xml | 356B |
| 359 | Kd.xml | 1018B |
| 360 | Kf.res.xml | 420B |
| 361 | Kf.xml | 1.83K |
| 362 | Km.res.xml | 391B |
| 363 | Km.xml | 1.93K |
| 364 | Kw.res.xml | 167B |
| 365 | Kw.xml | 1.67K |
| 366 | Alpha.xml | 428B |
| 367 | AlternatingFactor.res.xml | 217B |
| 368 | AlternatingFactor.xml | 618B |
| 369 | ANSI2Reliability.res.xml | 298B |
| 370 | ANSI2Reliability.xml | 636B |
| 371 | ANSIBendingReliability.res.xml | 301B |
| 372 | ANSIBendingReliability.xml | 642B |
| 373 | ANSIContactReliability.res.xml | 254B |
| 374 | ANSIContactReliability.xml | 576B |
| 375 | AppFactor.res.xml | 337B |
| 376 | AppFactor.xml | 1.69K |
| 377 | AsneDIN.xml | 2.43K |
| 378 | BallDiam.xml | 2.62K |
| 379 | CeFactor.res.xml | 259B |
| 380 | CeFactor.xml | 501B |
| 381 | CentrDist.xml | 2.63K |
| 382 | CmaFactor.res.xml | 238B |
| 383 | CmaFactor.xml | 896B |
| 384 | CmcFactor.res.xml | 234B |
| 385 | CmcFactor.xml | 442B |
| 386 | CpmFactor.res.xml | 348B |
| 387 | CpmFactor.xml | 861B |
| 388 | Deform.xml | 981B |
| 389 | EHs.xml | 15.16K |
| 390 | Ess1.xml | 2.28K |
| 391 | Ess2.xml | 21.42K |
| 392 | fa.xml | 2.33K |
| 393 | far.xml | 3.18K |
| 394 | Fbeta.xml | 1.95K |
| 395 | FbetaDIN.xml | 1.42K |
| 396 | fpt.xml | 15.53K |
| 397 | fpt3.xml | 12.96K |
| 398 | fptDIN.xml | 23.36K |
| 399 | fptDIN2.xml | 17.62K |
| 400 | Fpx.xml | 1.47K |
| 401 | Fr.xml | 15.02K |
| 402 | fr1.xml | 2.38K |
| 403 | Fr2.xml | 13.00K |
| 404 | FrDIN.xml | 22.84K |
| 405 | FrDIN2.xml | 17.63K |
| 406 | Fsuma.xml | 1.47K |
| 407 | GearRatio.xml | 1.06K |
| 408 | GearRatio3.xml | 910B |
| 409 | jn.xml | 2.28K |
| 410 | KPlist.xml | 1.56K |
| 411 | MeanStressFactor.res.xml | 159B |
| 412 | MeanStressFactor.xml | 457B |
| 413 | Module.xml | 4.21K |
| 414 | Module3.xml | 2.92K |
| 415 | MountingFactor.res.xml | 521B |
| 416 | MountingFactor.xml | 1.54K |
| 417 | Ny.xml | 548B |
| 418 | Rd.xml | 10.48K |
| 419 | Ro.xml | 11.63K |
| 420 | TechnologyFactor.res.xml | 217B |
| 421 | TechnologyFactor.xml | 641B |
| 422 | Th.xml | 3.40K |
| 423 | TolerISO.xml | 1.51K |
| 424 | Ts.xml | 2.76K |
| 425 | TsnDIN.xml | 2.34K |
| 426 | UnitSizes.xml | 1.16K |
| 427 | WormDiameterFactor.xml | 656B |
| 428 | Ydkor.xml | 7.20K |
| 429 | Ydnekor.xml | 6.55K |
| 430 | Yf.xml | 1.07K |
| 431 | Yo1kor.xml | 7.17K |
| 432 | Yo1nekor.xml | 6.40K |
| 433 | Yo2kor.xml | 7.20K |
| 434 | Yo2nekor.xml | 6.46K |
| 435 | YSa.xml | 2.05K |
| 436 | AnsiMetricMProfile.res.xml | 1.11K |
| 437 | AnsiMetricMProfile.xml | 53.96K |
| 438 | AnsiUnifiedScrewThreads.res.xml | 1.23K |
| 439 | AnsiUnifiedScrewThreads.xml | 80.59K |
| 440 | DIN.res.xml | 1.40K |
| 441 | DIN.xml | 69.80K |
| 442 | GOST.res.xml | 1.60K |
| 443 | GOST.xml | 77.91K |
| 444 | holes.cfg.res.xml | 4.30K |
| 445 | holes.cfg.xml | 31.25K |
| 446 | ISO.res.xml | 1.37K |
| 447 | ISO.xml | 67.78K |
| 448 | JIS.res.xml | 1.09K |
| 449 | JIS.xml | 49.12K |
| 450 | LegacyMap.xml | 5.55K |
| 451 | Imperial.res.xml | 200B |
| 452 | Imperial.xml | 2.89K |
| 453 | Metric.res.xml | 200B |
| 454 | Metric.xml | 2.62K |
| 455 | ShaftDiameter_Imp.xml | 3.92K |
| 456 | ShaftDiameter_Metric.xml | 2.83K |
| 457 | AdjustValues.xml | 3.69K |
| 458 | Grades_IT_Imp.xml | 6.03K |
| 459 | Grades_IT_Metric.xml | 8.44K |
| 460 | LowerDeviation_EI_Imp.xml | 9.64K |
| 461 | LowerDeviation_EI_Metric.xml | 18.54K |
| 462 | PreferredFits_Imp.res.xml | 1.94K |
| 463 | PreferredFits_Imp.xml | 3.89K |
| 464 | PreferredFits_Metric.res.xml | 2.35K |
| 465 | PreferredFits_Metric.xml | 3.54K |
| 466 | UpperDeviation_ES_Imp.xml | 14.97K |
| 467 | UpperDeviation_ES_Metric.xml | 19.22K |
| 468 | Bear2.SI.res.xml | 717B |
| 469 | Bear2.SI.xml | 2.07K |
| 470 | Clevis_Pin.res.xml | 618B |
| 471 | Clevis_Pin.SI.res.xml | 565B |
| 472 | Clevis_Pin.SI.xml | 1.29K |
| 473 | Clevis_Pin.xml | 1.48K |
| 474 | Connection.ANSI.res.xml | 775B |
| 475 | Connection.ANSI.SI.res.xml | 775B |
| 476 | Connection.ANSI.SI.xml | 2.19K |
| 477 | Connection.ANSI.xml | 2.21K |
| 478 | Connection.CSN.res.xml | 464B |
| 479 | Connection.CSN.SI.res.xml | 464B |
| 480 | Connection.CSN.SI.xml | 780B |
| 481 | Connection.CSN.xml | 781B |
| 482 | Connection.res.xml | 795B |
| 483 | Connection.SI.res.xml | 800B |
| 484 | Connection.SI.xml | 2.00K |
| 485 | Connection.xml | 2.09K |
| 486 | Gear1.res.xml | 10.63K |
| 487 | Gear1.SI.res.xml | 10.63K |
| 488 | Gear1.SI.xml | 224.17K |
| 489 | Gear1.xml | 235.29K |
| 490 | Gear3.res.xml | 3.26K |
| 491 | Gear3.SI.res.xml | 3.29K |
| 492 | Gear3.SI.xml | 103.16K |
| 493 | Gear3.xml | 105.56K |
| 494 | Gear3w.res.xml | 570B |
| 495 | Gear3w.SI.res.xml | 575B |
| 496 | Gear3w.SI.xml | 1.28K |
| 497 | Gear3w.xml | 1.29K |
| 498 | Hub-Shaft.res.xml | 486B |
| 499 | Hub-Shaft.SI.res.xml | 491B |
| 500 | Hub-Shaft.SI.xml | 1.76K |
| 501 | Hub-Shaft.xml | 1.79K |
| 502 | Joint.res.xml | 864B |
| 503 | Joint.SI.res.xml | 864B |
| 504 | Joint.SI.xml | 2.45K |
| 505 | Joint.xml | 2.50K |
| 506 | Journal.SI.res.xml | 435B |
| 507 | Journal.SI.xml | 1.06K |
| 508 | Mat.res.xml | 67.20K |
| 509 | Mat.SI.res.xml | 68.00K |
| 510 | Mat.SI.xml | 487.43K |
| 511 | Mat.xml | 591.70K |
| 512 | MatTypes.res.xml | 1.05K |
| 513 | MatTypes.SI.res.xml | 1.06K |
| 514 | MatTypes.SI.xml | 3.41K |
| 515 | MatTypes.xml | 3.47K |
| 516 | Pin.res.xml | 525B |
| 517 | PIN.SI.res.xml | 473B |
| 518 | PIN.SI.xml | 1.51K |
| 519 | Pin.xml | 1.73K |
| 520 | PressOn.res.xml | 964B |
| 521 | PressOn.SI.res.xml | 958B |
| 522 | PressOn.SI.xml | 2.94K |
| 523 | PressOn.xml | 2.98K |
| 524 | Rod-Clevis.res.xml | 485B |
| 525 | Rod-Clevis.SI.res.xml | 478B |
| 526 | Rod-Clevis.SI.xml | 1.19K |
| 527 | Rod-Clevis.xml | 1.21K |
| 528 | Shaft.res.xml | 569B |
| 529 | Shaft.SI.res.xml | 571B |
| 530 | Shaft.SI.xml | 2.56K |
| 531 | Shaft.xml | 2.63K |
| 532 | Solder.res.xml | 469B |
| 533 | Solder.Si.res.xml | 469B |
| 534 | Solder.Si.xml | 1.13K |
| 535 | Solder.xml | 1.14K |
| 536 | SolderBase.res.xml | 378B |
| 537 | SolderBase.Si.res.xml | 378B |
| 538 | SolderBase.Si.xml | 940B |
| 539 | SolderBase.xml | 963B |
| 540 | SpringBelleville.res.xml | 1.82K |
| 541 | SpringBelleville.SI.res.xml | 1.82K |
| 542 | SpringBelleville.SI.xml | 8.66K |
| 543 | SpringBelleville.xml | 8.77K |
| 544 | Weld.res.xml | 9.89K |
| 545 | Weld.SI.res.xml | 9.89K |
| 546 | Weld.SI.xml | 46.77K |
| 547 | Weld.xml | 48.65K |
| 548 | WireSpring.res.xml | 1.39K |
| 549 | WireSpring.SI.res.xml | 2.00K |
| 550 | WIreSpring.SI.xml | 269.64K |
| 551 | WireSpring.xml | 33.92K |
| 552 | WireSpring_Torsion.res.xml | 1.32K |
| 553 | WireSpring_Torsion.SI.res.xml | 2.00K |
| 554 | WireSpring_Torsion.SI.xml | 269.64K |
| 555 | WireSpring_Torsion.xml | 30.91K |
| 556 | Joint_Clevis.res.xml | 476B |
| 557 | Joint_Clevis.xml | 1.48K |
| 558 | Joint_Pins.res.xml | 402B |
| 559 | Joint_Pins.xml | 1.21K |
| 560 | Bear_M1.xml | 4.47K |
| 561 | Bear_M2.xml | 4.44K |
| 562 | Bear_Oil.res.xml | 2.72K |
| 563 | Bear_Oil.xml | 9.04K |
| 564 | Bear_Ol.xml | 4.84K |
| 565 | Bear_Pm.xml | 4.31K |
| 566 | Bear_R1.xml | 9.84K |
| 567 | Bear_R2.xml | 986B |
| 568 | Bear_So.xml | 3.13K |
| 569 | Bear_Temp.xml | 947B |
| 570 | Diameter_Metric.xml | 2.83K |
| 571 | Length.xml | 2.68K |
| 572 | SafetyFactor.xml | 708B |
| 573 | Thickness.xml | 1.88K |
| 574 | Diameter_Imp.xml | 10.20K |
| 575 | Diameter_Metric.xml | 10.71K |
| 576 | MaxLength_Imp.xml | 1.50K |
| 577 | MaxLength_Metric.xml | 1.28K |
| 578 | NutHeight_Imp.xml | 1.38K |
| 579 | NutHeight_Metric.xml | 1.16K |
| 580 | ClampingFactor.res.xml | 501B |
| 581 | ClampingFactor.xml | 1.61K |
| 582 | ShaftDiameter_Imp.xml | 1.49K |
| 583 | ShaftDiameter_Metric.xml | 1.66K |
| 584 | Texture_Imp.xml | 1.40K |
| 585 | Texture_Metric.xml | 946B |
| 586 | SBelts.res.xml | 144B |
| 587 | SBelts.xml | 8.37K |
| 588 | SBeltsMap.xml | 6.54K |
| 589 | ServiceFactor.res.xml | 793B |
| 590 | ServiceFactor.xml | 2.31K |
| 591 | A-DH-ISO5296.res.xml | 187B |
| 592 | A-DH-ISO5296.xml | 18.16K |
| 593 | A-DL-ISO5296.res.xml | 187B |
| 594 | A-DL-ISO5296.xml | 9.42K |
| 595 | A-DMXL-ISO5296.res.xml | 189B |
| 596 | A-DMXL-ISO5296.xml | 8.28K |
| 597 | A-DXH-ISO5296.res.xml | 188B |
| 598 | A-DXH-ISO5296.xml | 6.15K |
| 599 | A-DXL-ISO5296.res.xml | 188B |
| 600 | A-DXL-ISO5296.xml | 9.90K |
| 601 | A-DXXH-ISO5296.res.xml | 189B |
| 602 | A-DXXH-ISO5296.xml | 5.68K |
| 603 | A-DXXL-ISO5296.res.xml | 189B |
| 604 | A-DXXL-ISO5296.xml | 7.44K |
| 605 | B-DH-ISO5296.res.xml | 187B |
| 606 | B-DH-ISO5296.xml | 18.16K |
| 607 | B-DL-ISO5296.res.xml | 187B |
| 608 | B-DL-ISO5296.xml | 9.42K |
| 609 | B-DMXL-ISO5296.res.xml | 189B |
| 610 | B-DMXL-ISO5296.xml | 8.28K |
| 611 | B-DXH-ISO5296.res.xml | 188B |
| 612 | B-DXH-ISO5296.xml | 6.15K |
| 613 | B-DXL-ISO5296.res.xml | 188B |
| 614 | B-DXL-ISO5296.xml | 9.90K |
| 615 | B-DXXH-ISO5296.res.xml | 189B |
| 616 | B-DXXH-ISO5296.xml | 5.68K |
| 617 | B-DXXL-ISO5296.res.xml | 189B |
| 618 | B-DXXL-ISO5296.xml | 7.44K |
| 619 | DT10-DIN7721.res.xml | 206B |
| 620 | DT10-DIN7721.xml | 30.40K |
| 621 | DT2-5-DIN7721.res.xml | 207B |
| 622 | DT2-5-DIN7721.xml | 11.29K |
| 623 | DT20-DIN7721.res.xml | 206B |
| 624 | DT20-DIN7721.xml | 5.56K |
| 625 | DT5-DIN7721.res.xml | 205B |
| 626 | DT5-DIN7721.xml | 34.53K |
| 627 | H-ISO5296.res.xml | 179B |
| 628 | H-ISO5296.xml | 17.18K |
| 629 | L-ISO5296.res.xml | 179B |
| 630 | L-ISO5296.xml | 8.88K |
| 631 | MXL-ISO5296.res.xml | 181B |
| 632 | MXL-ISO5296.xml | 7.83K |
| 633 | T10-DIN7721.res.xml | 206B |
| 634 | T10-DIN7721.xml | 29.97K |
| 635 | T2-5-DIN7721.res.xml | 209B |
| 636 | T2-5-DIN7721.xml | 11.14K |
| 637 | T20-DIN7721.res.xml | 206B |
| 638 | T20-DIN7721.xml | 5.47K |
| 639 | T5-DIN7721.res.xml | 205B |
| 640 | T5-DIN7721.xml | 34.02K |
| 641 | XH-ISO5296.res.xml | 180B |
| 642 | XH-ISO5296.xml | 5.87K |
| 643 | XL-ISO5296.res.xml | 180B |
| 644 | XL-ISO5296.xml | 9.40K |
| 645 | XXH-ISO5296.res.xml | 181B |
| 646 | XXH-ISO5296.xml | 5.42K |
| 647 | XXL-ISO5296.res.xml | 181B |
| 648 | XXL-ISO5296.xml | 7.08K |
| 649 | flat_in.res.xml | 156B |
| 650 | flat_in.xml | 4.57K |
| 651 | flat_mm.res.xml | 156B |
| 652 | flat_mm.xml | 6.89K |
| 653 | H-ISO5294-FB.res.xml | 166B |
| 654 | H-ISO5294-FB.xml | 16.24K |
| 655 | H-ISO5294-FL.res.xml | 166B |
| 656 | H-ISO5294-FL.xml | 16.24K |
| 657 | H-ISO5294-FR.res.xml | 166B |
| 658 | H-ISO5294-FR.xml | 16.25K |
| 659 | H-ISO5294.res.xml | 163B |
| 660 | H-ISO5294.xml | 16.15K |
| 661 | L-ISO5294-FB.res.xml | 166B |
| 662 | L-ISO5294-FB.xml | 11.28K |
| 663 | L-ISO5294-FL.res.xml | 166B |
| 664 | L-ISO5294-FL.xml | 11.28K |
| 665 | L-ISO5294-FR.res.xml | 166B |
| 666 | L-ISO5294-FR.xml | 11.28K |
| 667 | L-ISO5294.res.xml | 163B |
| 668 | L-ISO5294.xml | 11.18K |
| 669 | MXL-ISO5294-FB.res.xml | 168B |
| 670 | MXL-ISO5294-FB.xml | 11.26K |
| 671 | MXL-ISO5294-FL.res.xml | 168B |
| 672 | MXL-ISO5294-FL.xml | 11.26K |
| 673 | MXL-ISO5294-FR.res.xml | 168B |
| 674 | MXL-ISO5294-FR.xml | 11.27K |
| 675 | MXL-ISO5294.res.xml | 165B |
| 676 | MXL-ISO5294.xml | 11.15K |
| 677 | T10-DIN7721-FB.res.xml | 168B |
| 678 | T10-DIN7721-FB.xml | 11.36K |
| 679 | T10-DIN7721-FL.res.xml | 168B |
| 680 | T10-DIN7721-FL.xml | 11.36K |
| 681 | T10-DIN7721-FR.res.xml | 168B |
| 682 | T10-DIN7721-FR.xml | 11.36K |
| 683 | T10-DIN7721.res.xml | 165B |
| 684 | T10-DIN7721.xml | 11.26K |
| 685 | T2-5-DIN7721-FB.res.xml | 171B |
| 686 | T2-5-DIN7721-FB.xml | 9.89K |
| 687 | T2-5-DIN7721-FL.res.xml | 171B |
| 688 | T2-5-DIN7721-FL.xml | 9.89K |
| 689 | T2-5-DIN7721-FR.res.xml | 171B |
| 690 | T2-5-DIN7721-FR.xml | 9.89K |
| 691 | T2-5-DIN7721.res.xml | 168B |
| 692 | T2-5-DIN7721.xml | 9.70K |
| 693 | T20-DIN7721-FB.res.xml | 168B |
| 694 | T20-DIN7721-FB.xml | 9.86K |
| 695 | T20-DIN7721-FL.res.xml | 168B |
| 696 | T20-DIN7721-FL.xml | 9.86K |
| 697 | T20-DIN7721-FR.res.xml | 168B |
| 698 | T20-DIN7721-FR.xml | 9.86K |
| 699 | T20-DIN7721.res.xml | 165B |
| 700 | T20-DIN7721.xml | 9.76K |
| 701 | T5-DIN7721-FB.res.xml | 167B |
| 702 | T5-DIN7721-FB.xml | 12.65K |
| 703 | T5-DIN7721-FL.res.xml | 167B |
| 704 | T5-DIN7721-FL.xml | 12.65K |
| 705 | T5-DIN7721-FR.res.xml | 167B |
| 706 | T5-DIN7721-FR.xml | 12.65K |
| 707 | T5-DIN7721.res.xml | 164B |
| 708 | T5-DIN7721.xml | 12.34K |
| 709 | XH-ISO5294-FB.res.xml | 167B |
| 710 | XH-ISO5294-FB.xml | 9.09K |
| 711 | XH-ISO5294-FL.res.xml | 167B |
| 712 | XH-ISO5294-FL.xml | 9.09K |
| 713 | XH-ISO5294-FR.res.xml | 167B |
| 714 | XH-ISO5294-FR.xml | 9.09K |
| 715 | XH-ISO5294.res.xml | 164B |
| 716 | XH-ISO5294.xml | 8.99K |
| 717 | XL-ISO5294-FB.res.xml | 167B |
| 718 | XL-ISO5294-FB.xml | 11.11K |
| 719 | XL-ISO5294-FL.res.xml | 167B |
| 720 | XL-ISO5294-FL.xml | 11.11K |
| 721 | XL-ISO5294-FR.res.xml | 167B |
| 722 | XL-ISO5294-FR.xml | 11.11K |
| 723 | XL-ISO5294.res.xml | 164B |
| 724 | XL-ISO5294.xml | 10.99K |
| 725 | XXH-ISO5294-FB.res.xml | 168B |
| 726 | XXH-ISO5294-FB.xml | 11.97K |
| 727 | XXH-ISO5294-FL.res.xml | 168B |
| 728 | XXH-ISO5294-FL.xml | 11.97K |
| 729 | XXH-ISO5294-FR.res.xml | 168B |
| 730 | XXH-ISO5294-FR.xml | 11.97K |
| 731 | XXH-ISO5294.res.xml | 165B |
| 732 | XXH-ISO5294.xml | 11.87K |
| 733 | XXL-ISO5294-FB.res.xml | 168B |
| 734 | XXL-ISO5294-FB.xml | 11.27K |
| 735 | XXL-ISO5294-FL.res.xml | 168B |
| 736 | XXL-ISO5294-FL.xml | 11.27K |
| 737 | XXL-ISO5294-FR.res.xml | 168B |
| 738 | XXL-ISO5294-FR.xml | 11.27K |
| 739 | XXL-ISO5294.res.xml | 165B |
| 740 | XXL-ISO5294.xml | 11.15K |
| 741 | Keyway.xml | 22.39K |
| 742 | Locknut.xml | 19.08K |
| 743 | NeckDown.xml | 19.89K |
| 744 | Scales.xml | 2.04K |
| 745 | ShaftDimensions.xml | 29.54K |
| 746 | Thickness_Imperial.xml | 3.54K |
| 747 | Thickness_Metric.xml | 4.16K |
| 748 | CSNHS.xml | 3.68K |
| 749 | DIN5462.xml | 4.01K |
| 750 | DIN5463.xml | 5.20K |
| 751 | DIN5464.xml | 3.66K |
| 752 | DIN5471.xml | 3.07K |
| 753 | DIN5472.xml | 5.98K |
| 754 | GOST1139-80HS_91.xml | 3.68K |
| 755 | GOST1139-80LS_91.xml | 3.11K |
| 756 | GOST1139-80MS_91.xml | 4.03K |
| 757 | ISO14LS.xml | 3.10K |
| 758 | ISO14MS.xml | 4.02K |
| 759 | Length_Imp.xml | 1.37K |
| 760 | Length_Metric.xml | 1.38K |
| 761 | SAEA.xml | 11.89K |
| 762 | SAEB.xml | 11.68K |
| 763 | SAEC.xml | 8.79K |
| 764 | Splines.cfg.res.xml | 1.27K |
| 765 | Splines.cfg.xml | 3.65K |
| 766 | ANSIB92.2M-30_Fillet_Side.xml | 236.74K |
| 767 | ANSIB92.2M-30_Flat_Side.xml | 236.74K |
| 768 | ANSIB92.2M-375_Fillet_Side.xml | 236.72K |
| 769 | ANSIB92.2M-45_Fillet_Side.xml | 139.59K |
| 770 | ANSIB92.2M_Tol.xml | 2.74K |
| 771 | ANSIB921-30_Fillet_Side.xml | 125.07K |
| 772 | ANSIB921-30_Flat_Diam.xml | 71.30K |
| 773 | ANSIB921-30_Flat_Side.xml | 107.26K |
| 774 | ANSIB921-30_Tol.xml | 13.56K |
| 775 | ANSIB921-375_Fillet_Side.xml | 125.08K |
| 776 | ANSIB921-45_Fillet_Side.xml | 132.20K |
| 777 | CSN4950-30_Fillet_Side.xml | 71.06K |
| 778 | CSN4950-30_Flat_Diam.xml | 71.06K |
| 779 | CSN4950-30_Flat_Side.xml | 71.05K |
| 780 | CSN4950-30_Tol.xml | 51.50K |
| 781 | CutterTypes.res.xml | 520B |
| 782 | CutterTypes.xml | 748B |
| 783 | DIN5480-30.xml | 100.69K |
| 784 | DIN5480-30_In.xml | 97.62K |
| 785 | DIN5480-30_Out.xml | 97.62K |
| 786 | DIN5480-30_Tol.res.xml | 878B |
| 787 | DIN5480-30_Tol.xml | 18.77K |
| 788 | DIN5481-55.xml | 103.37K |
| 789 | DIN5481-60.xml | 103.37K |
| 790 | DIN5482-30.xml | 92.93K |
| 791 | GOST6033-80-30_Fillet_Side.xml | 71.06K |
| 792 | GOST6033-80-30_Flat_Diam.xml | 71.06K |
| 793 | GOST6033-80-30_Flat_Side.xml | 71.06K |
| 794 | GOST6033-80-30_Tol.xml | 51.53K |
| 795 | Inv_Splines.cfg.res.xml | 1.87K |
| 796 | Inv_Splines.cfg.xml | 9.35K |
| 797 | ISO4156-30_Fillet_Side.xml | 210.32K |
| 798 | ISO4156-30_Flat_Side.xml | 226.93K |
| 799 | ISO4156-30_InspDims.xml | 169.99K |
| 800 | ISO4156-30_Tol.xml | 17.50K |
| 801 | ISO4156-375_Fillet_Side.xml | 212.62K |
| 802 | ISO4156-45_Fillet_Side.xml | 124.12K |
| 803 | SpringBelleville_ANSI.res.xml | 481B |
| 804 | SpringBelleville_ANSI.xml | 12.21K |
| 805 | SpringBelleville_CSN.res.xml | 480B |
| 806 | SpringBelleville_CSN.xml | 7.16K |
| 807 | SpringBelleville_DIN.res.xml | 480B |
| 808 | SpringBelleville_DIN.xml | 8.11K |
| 809 | SpringBelleville_GOST.res.xml | 481B |
| 810 | SpringBelleville_GOST.xml | 23.45K |
| 811 | SpringWireDiameter_ANSI.xml | 2.92K |
| 812 | SpringWireDiameter_Metric.xml | 3.61K |
| 813 | Spring_Belleville.cfg.res.xml | 388B |
| 814 | Spring_Belleville.cfg.xml | 1.36K |
| 815 | Spring_Compress_ClosedEndCoils.xml | 604B |
| 816 | Spring_Compress_GroundCoils.xml | 441B |
| 817 | Spring_Compress_TransitionCoils.xml | 492B |
| 818 | BeltsC4.xml | 505B |
| 819 | BeltsC5.xml | 653B |
| 820 | BeltSlip.xml | 700B |
| 821 | ServiceFactor.res.xml | 721B |
| 822 | ServiceFactor.xml | 2.14K |
| 823 | VBelts.res.xml | 175B |
| 824 | VBelts.xml | 13.75K |
| 825 | VBeltsMap.xml | 3.73K |
| 826 | 10-DIN2215.res.xml | 185B |
| 827 | 10-DIN2215.xml | 7.81K |
| 828 | 13-DIN2215.res.xml | 342B |
| 829 | 13-DIN2215.xml | 8.14K |
| 830 | 17-DIN2215.res.xml | 342B |
| 831 | 17-DIN2215.xml | 9.19K |
| 832 | 20-DIN2215.res.xml | 338B |
| 833 | 20-DIN2215.xml | 6.67K |
| 834 | 22-DIN2215.res.xml | 342B |
| 835 | 22-DIN2215.xml | 9.17K |
| 836 | 25-DIN2215.res.xml | 338B |
| 837 | 25-DIN2215.xml | 6.81K |
| 838 | 32-DIN2215.res.xml | 342B |
| 839 | 32-DIN2215.xml | 7.82K |
| 840 | 40-DIN2215.res.xml | 342B |
| 841 | 40-DIN2215.xml | 6.42K |
| 842 | 5-DIN2215.res.xml | 336B |
| 843 | 5-DIN2215.xml | 4.38K |
| 844 | 6-DIN2215.res.xml | 340B |
| 845 | 6-DIN2215.xml | 5.21K |
| 846 | 8-DIN2215.res.xml | 336B |
| 847 | 8-DIN2215.xml | 5.27K |
| 848 | A-ANSI-IP20.res.xml | 194B |
| 849 | A-ANSI-IP20.xml | 3.86K |
| 850 | AX-ANSI-IP20.res.xml | 211B |
| 851 | AX-ANSI-IP20.xml | 3.90K |
| 852 | B-ANSI-IP20.res.xml | 194B |
| 853 | B-ANSI-IP20.xml | 4.77K |
| 854 | BX-ANSI-IP20.res.xml | 210B |
| 855 | BX-ANSI-IP20.xml | 4.82K |
| 856 | C-ANSI-IP20.res.xml | 194B |
| 857 | C-ANSI-IP20.xml | 4.65K |
| 858 | CX-ANSI-IP20.res.xml | 210B |
| 859 | CX-ANSI-IP20.xml | 4.70K |
| 860 | D-ANSI-IP20.res.xml | 194B |
| 861 | D-ANSI-IP20.xml | 3.90K |
| 862 | 10-DIN2217-GRV.res.xml | 163B |
| 863 | 10-DIN2217-GRV.xml | 4.15K |
| 864 | 13-DIN2217-GRV.res.xml | 163B |
| 865 | 13-DIN2217-GRV.xml | 4.58K |
| 866 | 17-DIN2217-GRV.res.xml | 163B |
| 867 | 17-DIN2217-GRV.xml | 4.31K |
| 868 | 20-DIN2217-GRV.res.xml | 161B |
| 869 | 20-DIN2217-GRV.xml | 4.61K |
| 870 | 22-DIN2217-GRV.res.xml | 163B |
| 871 | 22-DIN2217-GRV.xml | 4.61K |
| 872 | 25-DIN2217-GRV.res.xml | 161B |
| 873 | 25-DIN2217-GRV.xml | 3.77K |
| 874 | 32-DIN2217-GRV.res.xml | 163B |
| 875 | 32-DIN2217-GRV.xml | 3.21K |
| 876 | 3V-ANSI-IP22-DGRV.res.xml | 211B |
| 877 | 3V-ANSI-IP22-DGRV.xml | 5.46K |
| 878 | 3V-ANSI-IP22-GRV.res.xml | 196B |
| 879 | 3V-ANSI-IP22-GRV.xml | 5.45K |
| 880 | 40-DIN2217-GRV.res.xml | 163B |
| 881 | 40-DIN2217-GRV.xml | 2.79K |
| 882 | 5-DIN2217-GRV.res.xml | 160B |
| 883 | 5-DIN2217-GRV.xml | 2.71K |
| 884 | 5V-ANSI-IP22-DGRV.res.xml | 211B |
| 885 | 5V-ANSI-IP22-DGRV.xml | 6.28K |
| 886 | 5V-ANSI-IP22-GRV.res.xml | 196B |
| 887 | 5V-ANSI-IP22-GRV.xml | 6.28K |
| 888 | 6-DIN2217-GRV.res.xml | 162B |
| 889 | 6-DIN2217-GRV.xml | 2.86K |
| 890 | 8-DIN2217-GRV.res.xml | 160B |
| 891 | 8-DIN2217-GRV.xml | 3.00K |
| 892 | 8V-ANSI-IP22-DGRV.res.xml | 196B |
| 893 | 8V-ANSI-IP22-DGRV.xml | 4.22K |
| 894 | 8V-ANSI-IP22-GRV.res.xml | 196B |
| 895 | 8V-ANSI-IP22-GRV.xml | 4.21K |
| 896 | A-ANSI-IP20-DGRV.res.xml | 183B |
| 897 | A-ANSI-IP20-DGRV.xml | 6.94K |
| 898 | A-ANSI-IP20-GRV.res.xml | 170B |
| 899 | A-ANSI-IP20-GRV.xml | 5.86K |
| 900 | B-ANSI-IP20-DGRV.res.xml | 200B |
| 901 | B-ANSI-IP20-DGRV.xml | 3.94K |
| 902 | B-ANSI-IP20-GRV.res.xml | 165B |
| 903 | B-ANSI-IP20-GRV.xml | 3.94K |
| 904 | C-ANSI-IP20-DGRV.res.xml | 200B |
| 905 | C-ANSI-IP20-DGRV.xml | 3.77K |
| 906 | C-ANSI-IP20-GRV.res.xml | 165B |
| 907 | C-ANSI-IP20-GRV.xml | 3.76K |
| 908 | D-ANSI-IP20-DGRV.res.xml | 195B |
| 909 | D-ANSI-IP20-DGRV.xml | 3.38K |
| 910 | D-ANSI-IP20-GRV.res.xml | 165B |
| 911 | D-ANSI-IP20-GRV.xml | 3.38K |
| 912 | GRVFLAT_MM.res.xml | 156B |
| 913 | GRVFLAT_MM.xml | 6.89K |
| 914 | SPA-DIN2211-GRV.res.xml | 162B |
| 915 | SPA-DIN2211-GRV.xml | 4.63K |
| 916 | SPB-DIN2211-GRV.res.xml | 162B |
| 917 | SPB-DIN2211-GRV.xml | 4.36K |
| 918 | SPC-DIN2211-GRV.res.xml | 162B |
| 919 | SPC-DIN2211-GRV.xml | 4.66K |
| 920 | SPZ-DIN2211-GRV.res.xml | 162B |
| 921 | SPZ-DIN2211-GRV.xml | 4.20K |
| 922 | V-FLAT_IN.res.xml | 156B |
| 923 | V-FLAT_IN.xml | 4.57K |
| 924 | 3V-ANSI-IP-22.res.xml | 200B |
| 925 | 3V-ANSI-IP-22.xml | 5.15K |
| 926 | 3VX-ANSI-IP-22.res.xml | 207B |
| 927 | 3VX-ANSI-IP-22.xml | 5.21K |
| 928 | 5V-ANSI-IP-22.res.xml | 200B |
| 929 | 5V-ANSI-IP-22.xml | 5.65K |
| 930 | 5VX-ANSI-IP-22.res.xml | 207B |
| 931 | 5VX-ANSI-IP-22.xml | 5.71K |
| 932 | 8V-ANSI-IP-22.res.xml | 200B |
| 933 | 8V-ANSI-IP-22.xml | 4.95K |
| 934 | SPA-DIN7753.res.xml | 189B |
| 935 | SPA-DIN7753.xml | 3.46K |
| 936 | SPB-DIN7753.res.xml | 189B |
| 937 | SPB-DIN7753.xml | 3.58K |
| 938 | SPC-DIN7753.res.xml | 189B |
| 939 | SPC-DIN7753.xml | 3.59K |
| 940 | SPZ-DIN7753.res.xml | 189B |
| 941 | SPZ-DIN7753.xml | 3.45K |
| 942 | XPA-DIN7753.res.xml | 195B |
| 943 | XPA-DIN7753.xml | 3.20K |
| 944 | XPB-DIN7753.res.xml | 195B |
| 945 | XPB-DIN7753.xml | 2.71K |
| 946 | XPC-DIN7753.res.xml | 195B |
| 947 | XPC-DIN7753.xml | 2.21K |
| 948 | XPZ-DIN7753.res.xml | 195B |
| 949 | XPZ-DIN7753.xml | 3.44K |
| 950 | SurfaceFactor.xml | 980B |
| 951 | Wldcsn.xml | 5.09K |
| 952 | exportdwg.ini | 1.01K |
| 953 | exportdxf.ini | 1.01K |
| 954 | FaceLoops.xml | 6.31K |
| 955 | FlatPattern.xml | 6.76K |
| 956 | FlatPatternExportOpts.xml | 1.63K |
| 957 | importacad.ini | 994B |
| 958 | importdxf.ini | 986B |
| 959 | importmdt.ini | 990B |
| 960 | Defaults.ini | 3.73K |
| 961 | MaterialsFavorites.xml | 4.51K |
| 962 | PartsListGroup1.xls | 65.50K |
| 963 | PartsListGroup1b.xls | 71.50K |
| 964 | PartsListTemplate.xls | 55.00K |
| 965 | WeldFavorites.ini | 988B |
| 966 | Assemblydrawings.tr | 2.76K |
| 967 | Coldpunchingparts.tr | 1.54K |
| 968 | Electricalcases.tr | 2.13K |
| 969 | Forgedparts.tr | 1.52K |
| 970 | Mechanicalparts.tr | 2.12K |
| 971 | Moldparts.tr | 2.51K |
| 972 | Pipes.tr | 1.17K |
| 973 | Steelmoldparts.tr | 2.04K |
| 974 | Surfacecoatings.tr | 384B |
| 975 | Weldassemblies.tr | 1.13K |
机械资料库
工程师必备！
- › 基础理论知识 —公差配合、螺纹连接、互换性、材料等基础面试知识
- › 工程材料 —各类常用钢、铝、合金等金属材料及塑件橡胶等非金属材料
- › 加工制造 —加工工艺，切削、锻造、冲压、焊接，工艺流程、材料性能
- › 机械传动 —齿轮传动、皮带传动、链传动、丝杆及气压液压传动等知识
- › 表面处理 —热处理、机械表面处理、化学表面处理等技术的理解与运用
- › 力学 —力学概念的理解、力学在机械设计实践中的应用及材料力学知识
- › 机械制图 —机械制图中的三视图、线型、标注等，及CAD操作等内容
- › 气压及液压 —气压、液压传动原理及构成、气缸和液压缸的运用及选型
- › 钣金 —钣金常用材料，折弯、冲压等加工工艺，设计原则以及实际应用
- › 模具设计 —涵盖注塑模具、冲压模具等知识，以及产品设计等多个领域
- 机械设备图纸
- 海量机械设备图纸、非标设备、自动化、包装、农业、医疗、食品、印刷等设备、及输送线、生产线等。
- 课程及毕业设计
- 机械类、理工类毕业设计、课程设计图纸下载，包含2D及3D设计图、论文参考。
- 机械零部件模型
- 各类机械零部件图纸下载，包含工装夹具、传动部件、电机减速机、液压气动、丝杆模组等。
- 产品设计模型
- 各行业产品设计模型，3C、电子、数码产品、电脑周边、手机相关、家用电器等图纸。
- 机器人图纸
- 智能多样的机器人图纸，自动化设计图、机械手、机械臂、码垛搬运、工业机器人等图纸。
- 模具设计图纸
- 多样化模具3D数模，注塑模具、冲压模具、铸造模具、模具设备、注塑机等。
- 交通运输类图纸
- 汽车相关设计图纸，整车设计、车身内外饰、底盘悬架、转向系统、制动系统、发动机、电子系统等。
- 建筑图纸
- 建筑类CAD及3D设计图，民用建筑，公共建筑、钢结构、室内设计、园林、暖通、给排水、别墅。
- 电子电工
- 电器设备及元件、感应类元件、控制类元件、操作类元件、仪器仪表、PLC、单片机等。
- 军工模型
- 飞机模型、无人机、坦克模型、航空类模型、航洋船舶、船只模型、潜水器等。
- 设计方案
- 工业设计方案、设备设计、生产线方案、非标自动化设计方案、创新创意设计等。
- 机械标准件模型库
- Soildworks标准件模型库、CAD、Creo/proe、UG标准件库、外购件选型库、绘图模板等。
- 机械设计资料汇总
- 全网最全机械设计资料汇总，宏图网精心收集，免费分享 助力机械行业奋斗的你。
- 常用外购件选型资料
- 电机、减速机、气缸、丝杆、模组、导轨、同步轮、电气件等选型软件及选型资料。
- 机械设计及软件视频教程下载
- CAD、Soildworks、Creo/proe视频教程、非标设计教程、钣金设计教程、电气教程等。
- 各类机械设计手册下载
- 机械设计手册、设计全书、加工手册、钣金手册、机械设计禁忌手册等。
- 标准件资料文档
- 紧固件、轴承、联轴器等机械标准件资料；国家标准、行业标准资料等。
- 加工工艺资料
- 机械制造工艺资料、车削加工知识及手册、热处理工艺技术资料、表面处理工手册等。
- 电气资料
- 电气工程师手册、plc编程技术知识及运用汇总、伺服电机使用手册及资料等。
- 常用机械设计工具下载
- 公差配合查询软件、齿厚换算工具、弹簧设计、材料查询软件、V带设计工具、钣金工具等。